凝汽器管束区流场的数值模拟与结构优化

摘要:

以某600 MW汽轮机发电机组所配套的凝汽器管束结构为例,基于多孔介质模型的CFD方法,对该凝汽器管束区域流场进行了数值模拟.针对该管束结构,通过调节管束排空气通道倾斜角度宽度、壳侧壁面尺寸以及管束位置的方法,对凝汽器内部流场进行改进.结果表明,整体管束优化后的结构能够有效减小涡流范围,并缓解管束主凝结区空气聚集现象,相比整体管束改进前的管束主凝结区的最大空气体积分数值降低了39.7%.

In this paper,a CFD method based on a porous medium model is used to numerically simulate the flow field in the condenser bundle area of a 600 MW turbine generator unit.For this tube bundle structure,the internal flow field of the condenser was improved by adjusting the width of the inclination angle of the tube bundle exhaust air passage,the size of the shell side wall and the position of the tube bundle.The results show that the optimized structure of the overall tube bundle can effectively reduce the vortex range and alleviate the air concentration in the main condensation zone of the tube bundle,and the maximum air concentration in the main condensation zone of the tube bundle is reduced by 39.7% compared with that before the improvement of the overall tube bundle.

作者:

江金鱼 陈晨 李亮 陈子龙 黄磊

Jiang Jinyu;Chen Chen;Li Liang;Chen Zilong;Huang Lei(School of Mechanical and Electrical Engineering,Hubei Polytechnic University,Huangshi 435003,China;Zhejiang Holip Electronic Technology Co.,Ltd.,Jiaxing 314300,China)

机构地区:

湖北理工学院机电工程学院 浙江海利普电子科技有限公司

出处:

《betway官方app 学报:自然科学版》 CAS 北大核心 2023年第5期82-88,共7页

Journal of Henan Normal University(Natural Science Edition)

基金:

国家级大学生创新创业训练计划项目(10920026) 校级科学研究计划项目(21xjz03Y) 校级理工科思政类项目(2022C01)。

关键词:

凝汽器 涡流 空气体积分数

condenser vortex air volume fraction

分类号:

TM621 [电气工程—电力系统及自动化]

凝汽器管束区流场的数值模拟与结构优化.pdf