Optimization of Decolorization Reaction System of Amino Black 10B Using Immobilized Ganoderma Lucidum Laccase

Number of views: 12
  • 分享到:

摘要:

采用响应面分析法,对固定化灵芝漆酶(Lac)降解氨基黑10B脱色反应体系进行优化分析.首先采用单因素实验分别获取反应体系中6个影响脱色率因素的最佳值;然后通过Plackett-Burman设计法对选取的6个影响因素进行筛选,确定主要影响因素为ABTS浓度和Lac酶量;再用最陡爬坡实验逼近ABTS浓度和Lac酶量2个主要因素的最大响应区域,并通过中心组合设计和响应面分析,确定2个主要影响因素的最佳值.优化后的氨基黑10B脱色200μL反应体系为:pH值4.6、温度30℃、ABTS浓度0.07mmol·L-1、硫酸铜浓度1.75mmol·L-1、Lac酶量6.23mg、初始底物浓度100mg·L-1.该反应体系氨基黑10B脱色率可达60.02%,比单因素法脱色率提高了44.46%.

Response surface methodology(RSM)was applied for optimization of amino black 10 Bdecolouration using immobilized ganoderma lucidum laccase.The optimum value of the six selected impact factors about decolorizing efficiency were measured through single factor experiment.A Plackett-Burman design was applied to screen potential key factors,and the steepest ascent method was adopted to approach the approximate optimal reaction system.Finally,central composite design and response surface methodogy were applied to define more precisely the optical composition of the reaction system.The data revealed ABST concentration and Laccase amount to be the most influential parameters,and the composition of the optimal reaction system was determined to consist of pH 4.6,temperature 30 ℃,copper sulfate concentration 1.75 mmol·L-1,ABTS concentration 0.07mmol·L-1,enzyme 6.23 mg,the initial amino black 10B100mg·L-1.The decolorization ratio of amino black 10 Bin the optimal reaction system was 60.02%,which was 44.46% higher than single factor method.

作者:

方金涛 夏敏 董冰雪 陈彩玉 杨玉娇 金秀婷 董文浩

机构地区:

南阳师范学院生命科学与技术学院

出处:

《betway官方app 学报:自然科学版》 CAS 北大核心 2015年第4期117-124,共8页

基金:

国家自然科学基金(31300669) 河南省科技厅科技攻关项目(112102210385 142102210479) 南阳师范学院高层次人才科研启动项目(zx20110007) 河南省教育厅科学技术重点研究项目(13A18081 14B180003)

关键词:

氨基黑10B脱色 单因素实验 Plackett-Burman设计法 响应面分析

decolouration of Amido black10B single factor method plackett-Burman design response surface methodology

分类号:

Q819 [生物学—生物工程]


固定化灵芝漆酶脱色氨基黑反应体系优化.pdf

Baidu
map